How to measure for roller blinds? (2024)

How to measure for roller blinds?

Measure both the width of the window and the height of the window. Consider adding an extra 3 inches to the width and height for optimum light control and privacy. Extending the blinds outside the window will also provide the space needed for the mounts and help the window appear larger than it actually is.

How much longer than window should roller blind be?

Measure from one side of the window to the other and then add 50mm to each side. This makes the blind wider and longer than the window, which helps you ensure the window is covered, reducing the chance of sunlight leaking through around the edges.

How much smaller should blinds be than the window inside mount?

Width is typically the most important figure. Generally, inside-mounted blinds should be about 1/4- to 3/8-inch smaller than your narrowest width measurement. Length is a bit different. If you don't want your blinds to rest on your window sill, make sure they're ¼-inch smaller than the length of the window frame.

Should roller blinds be wider than window?

Outside Recess Measurement

When fitting a Roller Blind outside a window recess, we recommend that the blind extends at least 7–10 cm to each side of the window recess and approximately 7 to 10cm (where possible) above and below, to ensure that the blind gives adequate coverage of the window when closed.

Are roller blinds measured from brackets?

Bracket-to-Bracket Width

Fabric width is exactly as it sounds, the width of the fabric itself. We don't recommend measuring for fabric width if you're fitting the blind inside a recess. Bracket-to-bracket width is the full width of the blind including the fittings.

How much overhang should blinds have?

If your window has no trim around it, measure a distance from point A to point B that includes any extra width you may desire for light gap coverage and privacy. We recommend adding 2 to 3 inches to each side.

Does the width of a roller blind include the fittings?

The size you specify refers to the total size of the roller blind, including the wall brackets. So you need to measure the distance between the brackets. The actual fabric is about 3.1 cm narrower than the total size.

What is exact size on blinds?

Recess refers to the depth of the blinds' window frame installation. Exact means that the blinds will be installed flush against the window frame. So if you're looking for a streamlined look, go with exact measurements. If you want a bit of a recess, choose recessed measurements.

What if blinds are too long?

Remove the plugs located on the bottom side of the bottom rail to release the string ladders and the knotted lift cord. Undo the knot in the lift cord and pull up the lift cord enough to release the slats you need to remove. Remove the bottom rail and the slat(s) necessary to shorten the blind to the desired length.

What size blinds do I need for 34.5 inch window?

In that case, you can choose a blind measuring 34.5 + 3 = 37.5 inches. Meanwhile, a blind measuring 37 inches will also do.

Can I use blinds that are too long?

If you own wood or faux wood blinds that are too long, there's no need to replace them. You can shorten them at home in a few easy steps. Read on to learn how to shorten wood blinds.

How much gap should be on each side of blinds?

Measure the width to the nearest 1/8 of an inch between the outermost points where you'll place the blinds. For optimum light control, the blinds should extend 1-1/2 inches beyond the window opening on each side.

How much space should be on either side of blinds?

Blinds.com recommends at least 1.5" of overlap on each side of the window for blinds and shades, and 2" of overlap on each side for solar or roller shades and vertical blinds. The extra width provides more privacy and light blockage. As always, record your measurements down to the nearest 1/8 inch.

How much wider should blinds be than the window?

We recommend going at least 2" wider than the opening on either side, so 4" total. For the height, go about 3 inches above the window trim (to allow for the mounting brackets) and measure from that point down to the window sill.

Should roller blinds go inside or outside the recess?

In summary. In summary, for Venetian, roller and vertical blinds, we would recommend they be hung from within the recess. However, Roman blinds would be better suited outside the recess, as they are able to let more light enter into the room.

What if my roller blinds are too wide?

Unroll the blind onto a flat surface. Cut off the excess fabric using scissors or a sharp cutting knife. A straight edge cut is important. Using a small hacksaw, cut the top roller tube 0.15cm wider than the fabric.

Can you put two roller blinds on one window?

Double roller blinds are already vastly popular thanks to their ability to provide block out blinds and light filtering or sunscreen blinds on a single window, but by combining the two installation-styles, double roller blinds become not just functional but incredibly stylish as well.

How do you hide roller blind brackets?

The most straightforward way to conceal electric roller blinds is to use a fascia or pelmet that fits over the top of the blind, hiding the rolling mechanism and blind fabric from view when not in use.

What is the drop on roller blinds?

The drop is the overall drop from the very top of the blind to where you want the base of the blind to finish. This could be the floor or at the bottom of the window (refer to diagram).

Should blinds be flush with window?

Keep these general rules in mind to achieve your desired look: For a flush look, a minimum of 2″ is required for inside mount. Measure to the nearest 1/8 inch. Measure each window even if they look similar in size.

How far do roller blinds stick out?

A roller blind's brackets protrude by approximately 55mm when top fixed or approximately 75mm when face fixed.

What is the standard width of blinds?

It is a good starting point to know that standard window blind sizes range between 24" to 60" wide and 36" to 72" long, though this can vary in older homes and with custom windows.

What is the common width of blinds?

If you've ever wondered what the standard size of window blinds is, the standard window length ranges from 36 to 72 inches, and the standard width ranges from 24 to 60 inches.

Can you shorten the length of a roller blind?

Luckily, roller blinds are one of the easier blinds to cut down to size, so if you're wondering how to shorten a roller blind, you're in luck, because it's easy-peasy!

What is the average lifespan of blinds?

How Long Do Blinds Last? The average lifespan of window treatments is seven to eight years but homeowners may want to replace their blinds even before then. Otherwise, old and worn-out blinds in your Philadelphia home might become unsafe and unsightly.

References

You might also like
Popular posts
Latest Posts
Article information

Author: Horacio Brakus JD

Last Updated: 05/05/2024

Views: 6244

Rating: 4 / 5 (51 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Horacio Brakus JD

Birthday: 1999-08-21

Address: Apt. 524 43384 Minnie Prairie, South Edda, MA 62804

Phone: +5931039998219

Job: Sales Strategist

Hobby: Sculling, Kitesurfing, Orienteering, Painting, Computer programming, Creative writing, Scuba diving

Introduction: My name is Horacio Brakus JD, I am a lively, splendid, jolly, vivacious, vast, cheerful, agreeable person who loves writing and wants to share my knowledge and understanding with you.